home *** CD-ROM | disk | FTP | other *** search
-
-
-
- - 1 -
-
-
-
- 1. _P_a_t_c_h__S_G_0_0_0_2_0_1_6__R_e_l_e_a_s_e__N_o_t_e
-
- This release note describes patch SG0002016 to IRIX 6.2.
-
- 1.1 _S_u_p_p_o_r_t_e_d__H_a_r_d_w_a_r_e__P_l_a_t_f_o_r_m_s
-
- This patch contains bug fixes for all hardware platforms.
-
-
- 1.2 _S_u_p_p_o_r_t_e_d__S_o_f_t_w_a_r_e__P_l_a_t_f_o_r_m_s
-
- This patch contains the Compilers Standard Execution
- Environment, version 7.2. This patch is made to install on
- a system running IRIX 6.2, IRIX 6.3 or IRIX 6.4, and the 7.2
- compilers. The software cannot be installed on other
- configurations.
-
- 1.3 _B_u_g_s__F_i_x_e_d__b_y__P_a_t_c_h__S_G_0_0_0_2_0_1_6
-
- This patch contains fixes for the following bugs in IRIX
- 6.2, IRIX 6.3 and IRIX 6.4. Bug numbers from Silicon
- Graphics bug tracking system are included for reference.
-
- +o SGI bug number 479942: This patch provides the 7.2
- compilers Standard Execution Environment which is not
- shipped as part of the 7.2 compilers for IRIX 6.2, IRIX
- 6.3 and IRIX 6.4. The 7.2 compilers for IRIX 6.2 are
- shipped with the 6.2 Standard Execution Environment.
- The 7.2 compilers for IRIX 6.3 and IRIX 6.4 are shipped
- with the 7.1 Standard Execution Environment.
-
- 1.4 _S_u_b_s_y_s_t_e_m_s__I_n_c_l_u_d_e_d__i_n__P_a_t_c_h__S_G_0_0_0_2_0_1_6
-
-
- This patch release includes these subsystems:
-
-
- +o patchSG0002016.compiler_eoe_sw.unix
-
- +o patchSG0002016.compiler_eoe_sw.cpp
-
- +o patchSG0002016.compiler_eoe_sw.lib
-
- +o patchSG0002016.compiler_eoe_sw64.lib
-
- +o patchSG0002016.compiler_eoe_man.dso
-
- +o patchSG0002016.compiler_eoe_man.unix
-
- +o patchSG0002016.c++_eoe_sw.lib
-
-
-
-
-
-
-
-
-
-
-
-
- - 2 -
-
-
-
- +o patchSG0002016.c++_eoe_sw64.lib
-
- +o patchSG0002016.ftn_eoe_sw.lib
-
- +o patchSG0002016.ftn_eoe_sw64.lib
-
- +o patchSG0002016.c++_dev_sw.lib
-
- +o patchSG0002016.c++_dev_sw.librw
-
- +o patchSG0002016.c++_dev_sw64.lib
-
- +o patchSG0002016.c_dev_sw.c
-
- +o patchSG0002016.c_dev_sw64.lib
-
- +o patchSG0002016.compiler_dev_hdr.lib
-
- +o patchSG0002016.compiler_dev_sw.abi
-
- +o patchSG0002016.compiler_dev_sw.lib
-
- +o patchSG0002016.compiler_dev_sw64.lib
-
- +o patchSG0002016.ftn_dev_sw.lib
-
- +o patchSG0002016.ftn_dev_sw.speclib
-
- +o patchSG0002016.ftn_dev_sw64.lib
-
- +o patchSG0002016.pas_dev_sw.lib
-
- +o patchSG0002016.pwrc_dev_sw.lib
-
-
- 1.5 _I_n_s_t_a_l_l_a_t_i_o_n__I_n_s_t_r_u_c_t_i_o_n_s
-
- Because you want to install only the patches for problems
- you have encountered, patch software is not installed by
- default. After reading the descriptions of the bugs fixed
- in this patch (see Section 1.3), determine the patches that
- meet your specific needs.
-
- If, after reading Sections 1.1 and 1.2 of these release
- notes, you are unsure whether your hardware and software
- meet the requirements for installing a particular patch, run
- _i_n_s_t. The _i_n_s_t program does not allow you to install
- patches that are incompatible with your hardware or
- software.
-
-
-
-
-
-
-
-
-
-
-
-
-
- - 3 -
-
-
-
- Patch software is installed like any other Silicon Graphics
- software product. Follow the instructions in your _S_o_f_t_w_a_r_e
- _I_n_s_t_a_l_l_a_t_i_o_n _A_d_m_i_n_i_s_t_r_a_t_o_r'_s _G_u_i_d_e to bring up the miniroot
- form of the software installation tools.
-
- Follow these steps to select a patch for installation:
-
- 1. At the Inst> prompt, type
-
- iiiinnnnssssttttaaaallllllll ppppaaaattttcccchhhhSSSSGGGG_x_x_x_x_x_x_x
-
- where _x_x_x_x_x_x_x is the patch number.
-
- 2. Initiate the installation sequence. Type
-
- IIIInnnnsssstttt>>>> ggggoooo
-
- 3. You may find that two patches have been marked as
- incompatible. (The installation tools reject an
- installation request if an incompatibility is
- detected.) If this occurs, you must deselect one of
- the patches.
-
- IIIInnnnsssstttt>>>> kkkkeeeeeeeepppp ppppaaaattttcccchhhhSSSSGGGG_x_x_x_x_x_x_x
-
- where _x_x_x_x_x_x_x is the patch number.
-
- 4. After completing the installation process, exit the
- _i_n_s_t program by typing
-
- IIIInnnnsssstttt>>>> qqqquuuuiiiitttt
-
-
-
- 1.6 _P_a_t_c_h__R_e_m_o_v_a_l__I_n_s_t_r_u_c_t_i_o_n_s
-
- To remove a patch, use the _v_e_r_s_i_o_n_s _r_e_m_o_v_e command as you
- would for any other software subsystem. The removal process
- reinstates the original version of software unless you have
- specifically removed the patch history from your system.
-
- vvvveeeerrrrssssiiiioooonnnnssss rrrreeeemmmmoooovvvveeee ppppaaaattttcccchhhhSSSSGGGG_x_x_x_x_x_x_x
-
- where _x_x_x_x_x_x_x is the patch number.
-
- To keep a patch but increase your disk space, use the
- _v_e_r_s_i_o_n_s _r_e_m_o_v_e_h_i_s_t command to remove the patch history.
-
- vvvveeeerrrrssssiiiioooonnnnssss rrrreeeemmmmoooovvvveeeehhhhiiiisssstttt ppppaaaattttcccchhhhSSSSGGGG_x_x_x_x_x_x_x
-
-
-
-
-
-
-
-
-
-
-
-
-
- - 4 -
-
-
-
- where _x_x_x_x_x_x_x is the patch number.
-
- 1.7 _K_n_o_w_n__P_r_o_b_l_e_m_s
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-